Water Tanks

Pressure tanks used with undersink reverse osmosis units are miniature versions of pressure tanks used on residential water wells.

Water is stored in a bladder, made of a material called butyl. When there is a demand for water, the water is pushed out of the tank’s bladder by air pressure.

When the RO tank is empty of water, it should have a pressure of five to 10 psi air. As water is forced into the tank by operation of the RO unit, pressure inside the tank increases. Standard RO units have a hydraulic shutoff valve that stops production of water when the pressure in the tank reaches approximately 2/3 of the pressure of the tap water that supplies the RO unit. Thus, if your city water pressure is 60 psi, the RO unit will fill the storage tank to around 40 psi before shutoff. If, however, your city pressure is only 50 psi, the RO unit will stop filling the tank when the pressure in the tank reaches a bit over 30 psi. This may make it difficult to supply an icemaker with your RO unit

Need to talk to us?

We are listening...